Mapping Talk
Mapping Talk
I didnt see a thread to ask questions purely about mapping so......now there is .
Anyway.... i have a question, how do i delete subtracted/added space? And/or how do i keep added/subtracted space when i subtract a bigger space over it? Please help me , i understand my questions might be stupid "BUT" i have an excuse...... i am stupid!
Anyway.... i have a question, how do i delete subtracted/added space? And/or how do i keep added/subtracted space when i subtract a bigger space over it? Please help me , i understand my questions might be stupid "BUT" i have an excuse...... i am stupid!
666
~ The 0men ~
~ The 0men ~
-
- Chaotic Dreams Team
- Posts: 2331
- Joined: Thu Jul 17, 2003 5:25 pm
- Location: Wherever Dreams Go Stale.
in order to delete added/subtracted space , simply click on the outline of the brush in the top/side/front view or wireframe view , and then either hit delete on your keyboard , or go to edit>delete
As far as
As far as
I dont think that can be done , the larger subtraction just cancels out any additions within it , so its always best to Subtract first , and then Add.how do i keep added/subtracted space when i subtract a bigger space over it?
-
- Posts: 446
- Joined: Wed Jun 23, 2004 10:51 pm
- Contact:
-
- Posts: 446
- Joined: Wed Jun 23, 2004 10:51 pm
- Contact:
OH you want to delete?
Just select it and hit delete key...
Or am i missing something?
Just select it and hit delete key...
Or am i missing something?
High Council member of The Generals
-
- Chaotic Dreams Team
- Posts: 2331
- Joined: Thu Jul 17, 2003 5:25 pm
- Location: Wherever Dreams Go Stale.
Did you remember to build the map?
Rebuilding the map is Essential to the creation of Any map, and should be done often.
http://www.chaoticdreams.org/bt/Pimpito/MBB.JPG
Rebuilding the map is Essential to the creation of Any map, and should be done often.
http://www.chaoticdreams.org/bt/Pimpito/MBB.JPG
Last edited by Zachariah on Sun Oct 10, 2004 3:12 pm, edited 1 time in total.
Thx
Its seems every time i fix a problem another pops up .
When i delete the subtracted space i lose anything subtracted/added inside it, including the textures on them.... so i try it again by making a box around it all 1st before deleting the brush and it still happens >_<
Is there any way to make the area bigger without kicking everything i have done so far in the shins?
Its seems every time i fix a problem another pops up .
When i delete the subtracted space i lose anything subtracted/added inside it, including the textures on them.... so i try it again by making a box around it all 1st before deleting the brush and it still happens >_<
Is there any way to make the area bigger without kicking everything i have done so far in the shins?
666
~ The 0men ~
~ The 0men ~
-
- Chaotic Dreams Team
- Posts: 2331
- Joined: Thu Jul 17, 2003 5:25 pm
- Location: Wherever Dreams Go Stale.
Instead of Encasing your Level in a larger brush , just increase the Size of your Outer brush. Select It like you would if you were going to move it or delete it , and then use the Scale Tool to Expand it uniformly in all directions
http://www.chaoticdreams.org/bt/Pimpito/MBB.JPG
http://www.chaoticdreams.org/bt/Pimpito/MBB.JPG
Thanks! I didnt even know the was possible, i thought once they were put there they couldnt be moved, changed or deleted .
I know i am a anoying little pain but say there is a skybox of 32768...... how big does the box where the sky ball is have to be? and how big does the sky ball need to be?
Because right now the stars look too close
I know i am a anoying little pain but say there is a skybox of 32768...... how big does the box where the sky ball is have to be? and how big does the sky ball need to be?
Because right now the stars look too close
666
~ The 0men ~
~ The 0men ~
-
- Chaotic Dreams Team
- Posts: 1594
- Joined: Wed Jan 15, 2003 10:05 am
- Location: Düsseldorf, Germany
We all had to go through that.The_0men wrote:I know i am a anoying little pain but say there is a skybox of 32768...... how big does the box where the sky ball is have to be? and how big does the sky ball need to be?
Because right now the stars look too close
You can have the geometry for the sky at whatever size you like. It is not related to the size of the hull around the level. The hull only tells the renderer where to display the sky. So changing the hull size doesn't make your stars look like farther away.
–The biggest trick the devil ever pulled, was convincing the world he didn't exist.–
-
- Chaotic Dreams Team
- Posts: 1594
- Joined: Wed Jan 15, 2003 10:05 am
- Location: Düsseldorf, Germany
Yes (depending on the texture tiling of course).The_0men wrote:So if i make the box with the stars and planet in bigger, or make the stars, planet and the box around it bigger it will make the backdrop look further away?
–The biggest trick the devil ever pulled, was convincing the world he didn't exist.–
Pep, I got a chuckle out of the top-secret blurring in that pic. Maybe I'm too easily amused
Omen: You CAN make a subtracted space over added space, but after doing so you need to right click on the new subtraction brush and set Order>Order To Last. This will tell the editor to build that brush before anything else within or in contact with it. But as Pepito said, it's better subtract first and only use this re-ordering trick to get out of trouble.
Also you could use the Vertex Editing tool (above and right of the scaling tool) to select and drag the corners of the brush to their new locations. This will keep the brush on the grid and allow seperate lateral and vertical control of where the brush moves to. It's also a great tool for changing simple brush shapes into sloped or angled shapes to get away from square boxey geometry. Only thing to be careful of is dragging a corner out of plane with the others thus twisting the face and probably creating a nasty BSP hole. Hold Ctrl+Alt+Left Mouse button and drag a box over the points ya want to move, then Ctrl+Left Mouse to drag them (I think).
******EDIT******
I was beaten to the punch, but I'll leave this in just in case it helps somebody else
For your sky, it sounds like you are placing the star texture on the walls of the box you are building in. Better technique is to set the surfaces where you want your sky to be seen as Fake Backdrop in the surface properties Flags section. Then build a seperate "Skybox" outside of your play area with your whole sky scene- Star texture, moons, nebulas..... now place an Info>ZoneInfo>SkyzoneInfo actor in the skybox and it will show the sky scene on all surfaces flagged to Fake Backdrop in your level. I would set the star texture to Unlit for a realistic look with no shadows in the corners. After re-building, go in the play area and check out the sky by hitting K (hotkey for Show Backdrop).
Omen: You CAN make a subtracted space over added space, but after doing so you need to right click on the new subtraction brush and set Order>Order To Last. This will tell the editor to build that brush before anything else within or in contact with it. But as Pepito said, it's better subtract first and only use this re-ordering trick to get out of trouble.
Also you could use the Vertex Editing tool (above and right of the scaling tool) to select and drag the corners of the brush to their new locations. This will keep the brush on the grid and allow seperate lateral and vertical control of where the brush moves to. It's also a great tool for changing simple brush shapes into sloped or angled shapes to get away from square boxey geometry. Only thing to be careful of is dragging a corner out of plane with the others thus twisting the face and probably creating a nasty BSP hole. Hold Ctrl+Alt+Left Mouse button and drag a box over the points ya want to move, then Ctrl+Left Mouse to drag them (I think).
******EDIT******
I was beaten to the punch, but I'll leave this in just in case it helps somebody else
For your sky, it sounds like you are placing the star texture on the walls of the box you are building in. Better technique is to set the surfaces where you want your sky to be seen as Fake Backdrop in the surface properties Flags section. Then build a seperate "Skybox" outside of your play area with your whole sky scene- Star texture, moons, nebulas..... now place an Info>ZoneInfo>SkyzoneInfo actor in the skybox and it will show the sky scene on all surfaces flagged to Fake Backdrop in your level. I would set the star texture to Unlit for a realistic look with no shadows in the corners. After re-building, go in the play area and check out the sky by hitting K (hotkey for Show Backdrop).
"If you build it.....they will come."---Field of Dreams
Nope i did the proper sky box way and makin my sky box bigger set hell lose...... I think i should of just left the map alone......its angery with me >_<
666
~ The 0men ~
~ The 0men ~