CUT2:PR3.0 Runtime Error problem

dogman · Post by **dogman** » Tue Jun 08, 2004 8:52 pm

I installed airbuckaneers, atlantis fight for earth, alien swarm and neotokyo before chaos

TKATK · Post by **TKATK** » Tue Jun 08, 2004 9:33 pm

well,as i dont know anything about U2 engine i hope JB will know something that might couse it

a thing which has coused for other games:tried redownloading,the zip might be corroupted,what mirror,what os,(if winxp) got service packs installed

DarK_AssassiN · Post by **DarK_AssassiN** » Tue Jun 08, 2004 11:21 pm

I have three downloads of it. I tried re-installing it. Also I have all the CBPs.

dogman · Post by **dogman** » Tue Jun 08, 2004 11:23 pm

yea i think i might just reinstall everything

yea i don't want to but i guess i'll just save my maps/mods and try

Kaboodles · Post by **Kaboodles** » Wed Jun 09, 2004 3:39 am

I had this problem too.

To fix it, I had to install UT2004 in another directory and then install all of the bonus packs and Chaos UT2 into that directory. It worked fine after that (except all of the other bugs, of course).

I called my new directory "Happy Fun UT2004"

TKATK · Post by **TKATK** » Wed Jun 09, 2004 11:49 am

i installed in C:/UT2004,if its based on install locations...

Ghost · Post by **Ghost** » Wed Jun 09, 2004 1:31 pm

I don't think it has anything to do with location...

I had a few errors as well and when I finally did get the game to start from the Chaos shortcut it started in normal boring old unreal menu instead of the Chaos menu. Fixed it by reinstalling the game, in the same directory, applied the required patch, then installed Chaos (zip version), then played. The directory I installed it was not the default C:\UT2004 but D:\Games\UT2004.

In short the easiest way to fix it imo is to patch to required version then install Chaos on a fresh install...

DarK_AssassiN · Post by **DarK_AssassiN** » Wed Jun 09, 2004 8:12 pm

I would rather wait then go through the pain of re-installing everything...

Hopefully the problem will be fixed on the next version.

dogman · Post by **dogman** » Wed Jun 09, 2004 8:14 pm

this is really annoying... i don't know what went wrong b/c i re-installed unreal tournament in F:\Unreal Tournament 2004 and now whenever I open any umod file, it opens up setup and tells me to update. but I already updated my version!

UPDATE: I don't know if any umod files work... :/ BUT i installed chaos by extracting the zip file and making sure all the files were there and now it works

(i reinstalled ut04, so you might have to also, but maybe not)

jeditobe1 · Post by **jeditobe1** » Wed Jun 09, 2004 9:59 pm

I take it by updating you installed the 3204 patch? If so double check it again.

If that still doesnt work, one workaround ( i had a similar problem with multiple installs) is to grab UMod Browser and extract it that way.

Brandon · Post by **Brandon** » Wed Jun 09, 2004 11:19 pm

I dont know if Im helping at all but does your target location read as the following:

C:\UT2004\System\UT2004.exe -mod="ChaosUT2"

DarK_AssassiN · Post by **DarK_AssassiN** » Thu Jun 10, 2004 3:02 pm

This is what it is...
C:\UT2004\System\UT2004.exe -MOD=ChaosUT2

And just so you know how much I have (and would have to re-install):
My UT2004 folder has 9.24GB of stuff....

TKATK · Post by **TKATK** » Thu Jun 10, 2004 3:14 pm

well,you wouldnt have to get much back,just backup youre ini,int files and uninstall,the setup if i remember correctly only deletes things created by 2k4

DarK_AssassiN · Post by **DarK_AssassiN** » Sun Jun 13, 2004 4:48 pm

I re-installed over everything and I tried to start CUT2 Evolution. Heres what I got.
UT2004 Build UT2004_Build_[2004-03-03_02.42]

OS: Windows XP 5.1 (Build: 2600)
CPU: GenuineIntel Unknown processor @ 2603 MHz with 255MB RAM
Video: NVIDIA GeForce4 MX 440 with AGP8X (6111)

General protection fault!

History: CheckTag <- LoadSummary <- ULinkerLoad::ULinkerLoad <- CheckTag <- LoadSummary <- ULinkerLoad::ULinkerLoad <- UObject::StaticAllocateObject <- (Package head) <- UObject::StaticConstructObject <- ULinkerLoad::CreateExport <- (head 9180081) <- IndexToObject <- ULinkerLoad::CreateExport <- (PortraitAS 9180081) <- ULinkerLoad::Create <- UObject::StaticLoadObject <- (Engine.Material CBP2_Karaash.head.PortraitAS NULL) <- CacheParseLine::Players <- UxUtil::CacheLoad <- UxUtil::CacheGet <- UxUtil::execGetPlayerRecord <- (ChaosGUI_UT2K4GUIController Package.ChaosGUI_UT2K4GUIController @ Function XInterface.GUIController.PrecachePlayerRecords : 0013) <- UObject::execClassContext <- (ChaosGUI_UT2K4GUIController Package.ChaosGUI_UT2K4GUIController @ Function XInterface.GUIController.PrecachePlayerRecords : 0013) <- UObject::ProcessEvent <- (ChaosGUI_UT2K4GUIController Package.ChaosGUI_UT2K4GUIController, Function XInterface.GUIController.InitializeController) <- UGameEngine::Init <- InitEngine

Then I deleted the inis and then I got this.
UT2004 Build UT2004_Build_[2004-03-03_02.42]

OS: Windows XP 5.1 (Build: 2600)
CPU: GenuineIntel Unknown processor @ 2603 MHz with 255MB RAM
Video: NVIDIA GeForce4 MX 440 with AGP8X (6111)

General protection fault!
___________________________________________
Then I deleyted the inis and got this-
UT2004 Build UT2004_Build_[2004-03-03_02.42]

OS: Windows XP 5.1 (Build: 2600)
CPU: GenuineIntel Unknown processor @ 2603 MHz with 255MB RAM
Video: NVIDIA GeForce4 MX 440 with AGP8X (6111)

Failed to enter ChaosNoIntro.ut2: Can't find file 'ChaosNoIntro.ut2'

History: UGameEngine::Init <- InitEngine

I think its fixed but I am missing that file. Anyone know?

jb · Post by jb » Sun Jun 13, 2004 4:56 pm

it does not look like you applied the UT2004 Patch yet. Remember remove the chaosut2.in's before you play

Chaotic Dreams

CUT2:PR3.0 Runtime Error problem

about to give up